[TRNSYS-users] adjacent zones in type 56 with no wall interface

[Arie Kalkman]

Dear David,

 

The answer depends on your modelling purpose: do you require (conductive)
heat flow, convective heatflow, buoyancy effects, or radiation to be
exchanged between the zones or not. For most applications, it is sufficient
to model an adjacent wall with 100% window area, no frame, and selecting the
‘no window’ option from the window library.

 

Kind regards,

 

 

Arie Kalkman

  _____  

Van: trnsys-users-bounces at engr.wisc.edu
[mailto:trnsys-users-bounces at engr.wisc.edu] Namens David Garcia
Verzonden: donderdag 30 maart 2006 12:32
Aan: trnsys-users at engr.wisc.edu
Onderwerp: [TRNSYS-users] adjacent zones in type 56 with no wall interface

 

Dear trnsys-users,

 

I´m modelling  a building with type 56, and I have two different thermal
zones which are adjacent zones but they have no wall between them, they are
communicated by air.

I would like to know how to indicate trnsys that these two zones are
adjacent but they have no surface in common.

I would appreciate any help.

Thanks.

 

David García Menéndez

Ing. Industrial

Dpto. de Física

Universidad de Oviedo

Edificio Departamental Este

Campus de Viesques

33204  Gijón

Tfno: 985 18 23 91 / 985 18 63 67

Fax: 985 18 23 90

e-mail: garciamdavid at uniovi.es

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20060330/2d1cdf3d/attachment-0001.htm>