[TRNSYS-users] Using Type 202

[Enertech]

Dear TRNSYS Users,

I would like to use the Type 202. I found the appropriate file on 
<http://www.trnsys.com/>http://www.trnsys.com, to insert them in "Program 
Files/TRNSYS" :
    * I pasted the file "Infiltration" in the file "Proforma"
    * I paste the file "Type202_ReleaseVersion.dll" in "Userlib/ReleaseDLL"
  I've just updated the TRNSYS version (0037 to 01).
In the Simulation Studio, I can find the file "Infiltration" in the 
proformas and insert the Type 202a or 202b. But when I run the simulation, 
I get this message error:

"TRNSYS message 105: A type was called in the TRNSYS input file but was 
either not linked in trndll.dll or was not found in an external DLL. A 
dummy routine was called in its place. Please link the type or remove it 
from the input file."

Could you tell me more about the way to insert a new type?
Thanks for your answer,

Christophe

===========================
ENERTECH
F-26160 FELINES SUR RIMANDOULE
tel-fax : 04 75 90 18 54
Email : sidler at club-internet.fr
Web  : http://sidler.club.fr
================================ 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20060602/03c1cbeb/attachment-0005.htm>