[TRNSYS-users] variable storage problems

[Jeroen Van der Veken]

Dear all,
I have made a thermostatic valve model based on the old type including 
pipes, a thermostatic valve and a radiator (currently named type 207, it 
seems).
It works fine when I use only one type in a project, but if I use more 
than one, the stored values seem to interfere.
When I make a copy of the valve model, give it another type number, use 
another name for the storage array and compile it; this new type works 
fine next to the original type. However, I need 9 thermostatic valves 
next each other and it's not really an elegant solution.
Is there another way to avoid this problem ?

Greetings,
Jeroen Van der Veken

-- 
Ir.Jeroen Van der Veken
Afdeling Bouwfysica
Katholieke Universiteit Leuven
Kasteelpark Arenberg 40
3001 Heverlee
T: +32 16 32 13 47
F: +32 16 32 19 80
@: jeroen.vanderveken at bwk.kuleuven.be

NEW MAILADRES WITHOUT .AC !! 


Disclaimer: http://www.kuleuven.be/cwis/email_disclaimer.htm