[TRNSYS-users] Problem with type 515 (TESS)

[Desmedt Johan]

Dear all, 

I tried to use type 515 for simulating a heating and cooling season.
Obvious a very simple ans usefull plug-in but I get an error when
running.  
Message               : The heating and cooling season scheduler model
was unable to read the correct information from the provided external
data file.  Please check the location and format of this file and re-run
the simulation..

Does any one know the answer to this I think easy question?
Thanks in advance.

Johan Desmedt

========================================
Johan Desmedt
VITO
Expertisecentrum Energietechnologie
Boeretang 200
B-2400 Mol (Belgie)
tel: +32.14.33.58.41
fax: +32.14.32.11.85
email: johan.desmedt at vito.be
http:\\www.vito.be
======================================== 




---
This e-mail, any attachments and the information it contains are confidential and meant only for the use of the addressee(s) only.  Access to this e-mail by anyone other than the addressee(s) is unauthorized.  If you are not the intended addressee (or responsible for delivery of the message to such person), you may not use, copy, distribute or deliver to anyone this message (or any part of its contents) or take any action in reliance on it.  In such case, you should destroy this message and notify the sender immediately.  If you have received this e-mail in error, please notify us immediately by e-mail or telephone and delete the e-mail from any computer.
All reasonable precautions have been taken to ensure no viruses are present in this e-mail and its attachments.  As our company cannot accept responsibility for any loss or damage arising from the use of this e-mail or attachments we recommend that you subject these to your virus checking procedures prior to use.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20060215/9864c83c/attachment-0005.htm>