[TRNSYS-users] pausing trnsys after each timestep

[David Bradley]

Michel,
   I don't know if running your simulation (including labview) from within 
the TRNSYS environment would be an option - TRNSYS will not continue on to 
the next timestep unless all of the components in the simulation have 
converged. You could write a wrapper Type that calls Labview and doesn't 
converge until Labview is ready to allow it. This is the method used for 
communicating between TRNSYS and EES using Type66 - Type66 essentially 
handles the communication between TRNSYS and EES, pausing the TRNSYS 
simulation indefinitely while it calls EES and waits for EES's results to 
come back.
Kind regards,
  David


At 11:49 2/9/2006, michel.haller at solarenergy.ch wrote:
>Content-class: urn:content-classes:message
>Content-Type: multipart/alternative;
>         boundary="----_=_NextPart_001_01C62DA1.1F937C11"
>
>Hello
>
>I'm trying to run TRNSYS from LabVIEW, and I intend to pause TRNSYS after 
>each simulation timestep until LabVIEW decides that it should calculate 
>the next timestep. Starting TRNSYS is no problem - it can be done with a 
>command line call from LabVIEW, but does anyone have an idea how to tell 
>TRNSYS to pause after every timestep until it get's a call to go on?
>
>Thanks for helping...
>
>Sonnige Grüsse
>Michel Haller
>
>----------
>Michel Haller
>Systemtechnik / System Division
>Institut für Solartechnik SPF: 
><http://www.solarenergy.ch/spf.php?lang=de&fam=44&tab=3>Adresse / 
><http://www.solarenergy.ch/spf.php?lang=de&fam=41&tab=1>Website
>Hochschule für Technik Rapperswil HSR
>Tel. +41 55 222 48 29
>Fax +41 55 222 48 44
>
>----------
>
>_______________________________________________
>TRNSYS-users mailing list
>TRNSYS-users at engr.wisc.edu
>https://www.cae.wisc.edu/mailman/listinfo/trnsys-users

****************************************************************************************
Thermal Energy System Specialists (TESS), LLC
David BRADLEY                           2916 Marketplace Drive - Suite 104
Partner                                        Madison, WI 53719
Phone: (608) 274-2577 USA
Fax: (608) 278-1475
E-mail: bradley at tess-inc.com
Web Pages:  http://www.tess-inc.com     and      http://www.trnsys.com

"Providing software solutions for today's energy engineering projects"
****************************************************************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20060209/d0d9a7e6/attachment-0001.htm>