[TRNSYS-users] Cold room

[David Bradley]

Markus,
   I think you could probably set the boundary temperature to be an input 
(instead of a constant value) and assign the value of -19 to the input. I 
don't think that there is anything inherently wrong with a negative 
boundary temperature as far as Type56 is concerned. The limit may only be 
in TRNBuild. Perhaps Transsolar can elaborate?
Cheers,
  David


At 10:47 8/30/2006, Brychta Markus wrote:
>Content-class: urn:content-classes:message
>Content-Type: multipart/alternative;
>         boundary="----_=_NextPart_001_01C6CC4B.AA484B3F"
>
>Hi everybody,
>
>I´d like to simulate a depository. In this depository a cold room is 
>located, which is kept on constant temparature of -19°C. I tried to model 
>this situation by defining a boundary wall at -19°C.
>The problem is, that TRNBUILD doesn´t allow any boundary temperatures 
>below zero.
>
>Has anybody an idea how to deal with this?
>
>Thanks a lot!!
>
>Best regards,
>Markus Brychta.
>_______________________________________________
>TRNSYS-users mailing list
>TRNSYS-users at engr.wisc.edu
>https://www.cae.wisc.edu/mailman/listinfo/trnsys-users

****************************************************************************************
Thermal Energy System Specialists (TESS), LLC
David BRADLEY                           2916 Marketplace Drive - Suite 104
Partner                                        Madison, WI 53719
Phone: (608) 274-2577 USA
Fax: (608) 278-1475
E-mail: bradley at tess-inc.com
Web Pages:  http://www.tess-inc.com     and      http://www.trnsys.com

"Providing software solutions for today's energy engineering projects"
****************************************************************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20060830/578b91c0/attachment-0005.htm>