[TRNSYS-users] TRNSYS 16 - Type25b (User-Supplied Units) Problem
Edward Halawa
Edward.Halawa at unisa.edu.au
Mon Aug 7 23:35:51 PDT 2006
Dear All,
Type 25b (User-Supplied units) seems to have problem. I have had the
following error message a number of times with various projects.
Usually, the error message appear after a number of runs and when you
edit the connections to this TYPE. Unfortunately, the TRNSYS 16 error
diagnostics (see below) doesn't seem to be able to detect this problem
and provide a solution.
My solution so far is: simply change this to Type25c ... never use type
25b.
======================================================
*$UNIT_NAME Type25b
*$MODEL .\Output\Printer\User-Supplied Units\Type25b.tmf
*$POSITION 820 153
*$LAYER Outputs #
Unit1 Unit2
Unit3 Unit4
Unit5
Unit6 Unit7
Unit8 Unit9
Unit10
* 1 Printing interval
*** Fatal Error at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 48 : The TRNSYS processor has reported that an
unrecognized control card was found while trying to read the input file.
This error can be caused by underspecifying a required number of items
in the input file. For example, specifiying only 9 parameters after a
"PARAMETERS 10" card has been read can cause this error. The line that
caused this error is listed in the reported information below.
Reported information : STEP
========================================================================
=================================================
ehalawa
_______________________________________________ TRNSYS-users mailing
list TRNSYS-users at engr.wisc.edu
https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20060808/e4e7bcb0/attachment-0005.htm>
More information about the TRNSYS-users
mailing list