[TRNSYS-users] Parametric Run

[luca.brodolini]

Many thanks to all for your suggestions.
I will try to use the Todd Houstein's table creator (it is exactly what 
i'm looking for!) and then i will write an optimization programm in 
Fortran to recall Trnsys..no,no it's better that i say : 'i will use the 
table creator and then i will try to write an optimization programm'!


Best regard

Luca Brodolini







henkwitte wrote:

>With GenOpt is is quite easy to do automatic calibration or parametric runs 
>on 1 or multiple variables.
>
>You can get GenOpt (free) at:
>
>http://gundog.lbl.gov/GO/index.html
>
>Hope it helps!
>
>Henk Witte
>
>
>  
>
>>I use a c++-program that manipulates the values in the .dck file, starts 
>>TRNExe.exe, and reads the results from the output files that were 
>>generated during the run. If you use the option "/h" for TRNExe.exe, then 
>>the program runs in the background and y
>>ou can work "normally" (depending on your CPU, I guess) on the computer.
>>
>>Hope that helped, Dieter Gottwald
>>
>>    
>>
>>>-----Ursprüngliche Nachricht-----
>>>Von: trnsys-users-bounces at engr.wisc.edu [mailto:trnsys-users-
>>>bounces at engr.wisc.edu] Im Auftrag von luca.brodolini
>>>Gesendet: Montag, 10. April 2006 08:53
>>>An: trnsys-users at engr.wisc.edu
>>>Betreff: [TRNSYS-users] Parametric Run
>>>
>>>Dear TRNSYS users,
>>>
>>>i'm a student and i'm using Trnsys to simulate a parametric run. I know
>>>that i can create a table in TRNEdit and then run it, but the idea is to
>>>create a matrix of values with an external program and then write it in
>>>the file .TBL that will be read from TRNEdit to make the parametric run.
>>>How can i write this input in that file? The file is written in a code
>>>that i can identify (open the file .TBL with Notepad).
>>>
>>>Thanks!
>>>
>>>Luca Brodolini
>>>_______________________________________________
>>>TRNSYS-users mailing list
>>>TRNSYS-users at engr.wisc.edu
>>>https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
>>>      
>>>
>>_______________________________________________
>>TRNSYS-users mailing list
>>TRNSYS-users at engr.wisc.edu
>>https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
>>    
>>
>
>Groenholland b.v.
>Valschermkade 26
>1059 CD Amsterdam
>The Netherlands
>
>Tel.: +31 (0)20 - 6159050
>Fax:+31 (0)20 - 6177082
>
>mobiel: 0628176535
>
>http://www.groenholland.nl
>
>
>_______________________________________________
>TRNSYS-users mailing list
>TRNSYS-users at engr.wisc.edu
>https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
>
>  
>