[TRNSYS-users] SET_STORAGE_VARS(STORED,NITEMS,INFO)

[Louise St.Germain]

Hi David,
 
I suspected it was something like that. The problem still exists,
though, if you use the “export to Fortran” option after defining a new
component’s proforma – the code skeleton generated still has all the old
function names. (This is how I noticed the problem, not through the
manual). It might be worth fixing the export-to-fortran wizard, unless
it’s already been fixed in a newer version or update. 
 
Thanks,
 
-Louise
 
Louise St.Germain
Graduate Research Assistant
Integrated Energy Systems (IESVic)
University of Victoria
lsg at uvic.ca
 
-----Original Message-----
From: David Bradley [mailto:bradley at tess-inc.com] 
Sent: October 28, 2005 1:17 PM
To: Louise St.Germain; 'TRNSYS Newsgroup'
Subject: RE: [TRNSYS-users] SET_STORAGE_VARS(STORED,NITEMS,INFO)
 
Louise, and Jörn,
  Just to clarify the situation, during the development of the TRNSYS 16
beta version we used the subroutine names: SET_STORAGE_SIZE( ),
SET_STORAGE_VARS( ), and GET_STORAGE_VARS( ) but by the time the
official release was made, the subroutines were renamed: SetStorageSize(
), SetStorageVars( ), and GetStorageVars( ). The working names for those
three subroutines might have been printed in some early documentation
but with the release of 16.00.0037 in March 2005, the 08-Programmer's
Guide was updated with the correct information.
Kind regards,
 david


At 02:49 PM 10/28/2005, Louise St.Germain wrote:


Hi Jörn,
 
I program in Fortran but had the same problem of the subroutines not
recognized.
 
I had to replace 
SET_STORAGE_VARS(STORED,NITEMS,INFO)
With:
            setStorageVars(STORED,NITEMS,INFO)
And it has worked. You might also run into problems with the related
function calls SET_STORAGE_SIZE(
) and GET_STORAGE_VARS(
), which I had
to change to setStorageSize(
) and getStorageVars(
) respectively. I’m
not sure if this is the same problem as you’re having with C++, but it
might be related.
 
Good luck,
 
-Louise
 
 
Louise St.Germain
Graduate Research Assistant
Integrated Energy Systems (IESVic)
University of Victoria
lsg at uvic.ca
 
-----Original Message-----
From: trnsys-users-bounces at engr.wisc.edu [
<mailto:trnsys-users-bounces at engr.wisc.edu>
mailto:trnsys-users-bounces at engr.wisc.edu] On Behalf Of Jörn von Grabe
Sent: October 28, 2005 7:31 AM
To: TRNSYS Newsgroup
Subject: [TRNSYS-users] SET_STORAGE_VARS(STORED,NITEMS,INFO)
 
Dear all,
 
does anyone know how to store values between timesteps in a user written
type in c++? The template looks like this

SET_STORAGE_VARS(STORED,NITEMS,INFO)
but does't work. c++ doesn't recognise the subroutine.
 
I will appreciate any help I can get,
regards, Jörn
 
 
[]
 


_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at engr.wisc.edu
https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
************************************************************************
****************
Thermal Energy System Specialists (TESS), LLC 
David BRADLEY                           2916 Marketplace Drive - Suite
104 
Partner                                        Madison, WI 53719 
Phone: (608) 274-2577 USA 
Fax: (608) 278-1475 
E-mail: bradley at tess-inc.com 
Web Pages:  http://www.tess-inc.com <http://www.tess-inc.com/>      and
http://www.trnsys.com <http://www.trnsys.com/> 

"Providing software solutions for today's energy engineering projects" 
************************************************************************
****************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20051028/51fddf9a/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 6358 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20051028/51fddf9a/attachment-0001.jpeg>