[TRNSYS-users] type 107

[apalmero at fe.up.pt]

Dear users,
 I am using Trnsys 16. I am connecting the Type 107 (absorption chiller) to the
Type 56 (multizone building) for obtaining the total energy consumed for
cooling. I connected an air to water heat exchanger (Type 5) between Type 107
and Type 56. My problem is in the inputs of the Type 107. I did the next:
  Hot side outlet temperature (Type 5)  ->cooling water inlet temperature (Type
107)
  Chilled water temperature (Type 107)->cold side inlet temp. (Type 5)
  Cold side outlet (Type 5) ->T_Cool_ON (input) (Type 56)
  Air temperature of zone (Type 56) ->hot side inlet temp. (Type 5)
 But I don’t know what I do with the input “Chilled water inlet temperature”
(Type 107).
  Can you help me?
Thank you
Ana