[TRNSYS-users] Equation

Diego A. Arias daarias at wisc.edu
Wed Nov 16 07:19:38 PST 2005


Dear Daniel,

If you have connected an output from a component (say A)  as input to 
another (B), the information that you enter in the 'Input' tab window in 
component B is used initial values.   The information from component A 
is fed to component B during the next time steps.
Please let me know if this helps.
Best regards,

Diego


Büchele Daniel wrote:

> Is it also possible that if I use an output of a zone as input (in 
> depence of an equation)
> I must give this input a start value ??
> How can I do this ???
>
> Thanks in advance
>
> Mit freundlichen Grüssen / Kind regards
> Daniel Büchele
> Projektingenieur Energie
>
> *Helbling Beratung + Bauplanung AG*
> Hohlstrasse 614
> CH-8048 Zürich
> Telefon +41 44 438 18 64
> Telefax +41 44 438 18 10
>
> _mailto:daniel.buechele at helbling.ch__ <__http://www.helbling.ch_ 
> <http://www.helbling.ch/>_>_
>
>------------------------------------------------------------------------
>
>_______________________________________________
>TRNSYS-users mailing list
>TRNSYS-users at engr.wisc.edu
>https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
>  
>


-- 

Diego A. Arias
TRNSYS Coordinator
Solar Energy Laboratory
University of Wisconsin - Madison
1500 Engineering Drive
Madison, WI 53706



More information about the TRNSYS-users mailing list