[TRNSYS-users] energy_zone.bal / T56_std-Output.sum

[Enertech]

Dear TRNSYS Users,

For a yearly building energy balance, I usually use the output 
"energy_zone.bal". I've just done a little comparison between results from 
"energy_zone.bal" and from "T56_std-Output.sum" (see attached file). The 
comparison is perfectly correct for HEATING, COOLING, INFILTRATION, 
VENTILATION and INT_GAINS but not for solar gains (Qsol_gain in 
energy_zone.bal and solar rad in T56_std-Output.sum). I don't understand 
why there is a difference. Should these values be equal ? If not, can you 
tell me if Qsol_gain in energy_zone.bal corresponds to the solar gains of 
the zone ? So, what is solar_rad ?

Kind Regards,
Christophe


===========================
ENERTECH
F-26160 FELINES SUR RIMANDOULE
tel-fax : 04 75 90 18 54
Email : sidler at club-internet.fr
Web  : http://sidler.club.fr
================================ 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: comparison.xls
Type: application/octet-stream
Size: 17408 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20051107/3fbf4bec/attachment-0005.obj>