[TRNSYS-users] Type 28 a,b,c,d

[Michaël Kummert]

Edward,

> 
> I want to use Type 28 a (Include Energy Balance) so that I can save the 
> results to an external file. However, everytime I change Operation code 
> 1 from default value of 0 (zero) to a positive value, it does not change 
> ! The same thing happens when I change other operation codes from 0 
> (zero) to a positive value !!! No problem when I used 28c, but the 
> results are in the listing file.
> 

I could not reproduce your problem with the latest TRNSYS 15 release 
(15.3.00 + patch on the SEL website).
It looks like the minimum/maximum values for that parameter are wrong in 
the proforma. If this is the problem a workaround is to set the variable 
type to string. This will allow you to type in any value.

Kind regards,

Michaël Kummert

-- 
_________________________________________________________

Michaël Kummert

Solar Energy Laboratory - University of Wisconsin-Madison
1303 Engr Res Bldg, 1500 Engineering Drive
Madison, WI 53706

Tel: +1 (608) 263-1589
Fax: +1 (608) 262-8464
E-mail: kummert at engr.wisc.edu

SEL Web Site: http://sel.me.wisc.edu
TRNSYS Web Site: http://sel.me.wisc.edu/trnsys