[TRNSYS-users] linking problems solved

[Michaël Kummert]

Adriana,

> I've just solved the problems I was speaking about in my previous e-mail.
> By upgrading from CVF 6.6.0 to 6.6.B the rebuilding of the dll seems to 
> work succesfully,
> I wonder why.

Because TRNSYS uses some features that were implemented (or fixed) in 
that update, such as the DLL export instructions, etc. This is why we 
insist so much on the need for the 6.6B update. It seems that "so much" 
is not enough yet so this is a good opportunity to remind all users that 
they will save time and frustration if they use Compaq Visual Fortran 
6.6B and not any of the other versions (there is a 6.6C update but it is 
not required by TRNSYS and introduces some problems so we do not 
recommend that you install it --- OK, more clearly: Use 6.6B and nothing 
else!).

Kind regards,

Michaël Kummert

-- 
_________________________________________________________

Michaël Kummert

Solar Energy Laboratory - University of Wisconsin-Madison
1303 Engr Res Bldg, 1500 Engineering Drive
Madison, WI 53706

Tel: +1 (608) 263-1589
Fax: +1 (608) 262-8464
E-mail: kummert at engr.wisc.edu

SEL Web Site: http://sel.me.wisc.edu
TRNSYS Web Site: http://sel.me.wisc.edu/trnsys