[TRNSYS-users] Solver 1 Error

[David Bradley [SEL]]

Krishna,
  I have just done some testing and I do not find any problems running a 
SOLVER 1 simulation that contains Type109.  In looking at the Type109 
code, it would appear that you can get Error139 if you exceed the 
maximum number of Type109 instances in a given simulation. By default 
you are able to have 10 instances of Type109. If you would like to send 
me the input file that is giving you trouble, I would be happy to take a 
look at it. You can email it and any accompanying data files to 
dbradley at engr.wisc.edu.
Kind regards,
  David

Krishna wrote:

> Could any one let me know if Type 109 weather data is compatible with 
> Powell method (Solver 1). When I run the simulation the program 
> crashes and I get the following error in the list file.
>  
> ***** ERROR *****        TRNSYS ERROR # 139
>  UNIT 109 TYPE 109 NOT FOUND IN PROGRAM MEMORY.
>  
>  This simulation runs fine with Solver 2.
> Thank you,
> Krishna
>
>------------------------------------------------------------------------
>
>_______________________________________________
>TRNSYS-users mailing list
>TRNSYS-users at engr.wisc.edu
>https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
>  
>

-- 
David BRADLEY
TRNSYS Engineer
Solar Energy Laboratory - University of Wisconsin, Madison
1500 Engineering Drive
Madison, WI  53706  
United States

ph: +1 608 263 1589
fax: +1 608 262 8464
email: dbradley at engr.wisc.edu

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20050725/defe27ce/attachment-0005.htm>