[TRNSYS-users] Range check error and error 103

[David Bradley]

Dear Antonio,
   Unfortunately, a "Range Check" error means that there was a problem in 
your simulation that was not caught by TRNSYS and which resulted in some 
illegal function (a divide by zero, an array going out of bounds, etc.). In 
TRNSYS 16 we added some additional debugging features that allow you to 
track down these errors more easily but in TRNSYS 15, without running your 
simulation through a Fortran compiler developer's studio, there isn't much 
more information that you can get.

   The error that you describe in Type140 looks like a problem with the 
call to Typeck. Type140 is a non-standard component (I think) and you 
should contact your distributor for help in solving the problem. Your 
distributor will also be able to help with the Range Check issue and will 
probably ask you to send your project file and the Type140 code. If you 
aren't sure who your distributor is, please send your user id number 
(15B-Xyyy where X is a letter and yyy is a number) to me by emailing 
bradley at tess-inc.com and I will be happy to get you in contact with the 
correct person - who knows, the correct person might even be me!
Cheers,
   David

At 11:59 AM 7/21/2005, Antonio Aguirre Glez. de San Pedro wrote:
>Hello everyone,
>         I am a new user of TRNSYS 15 and I am having trouble to make a new
>component work. So far, the most difficult problems have been:
>         1) RANGE CHECK ERROR
>         2) The other error is listed below, I can't work it out and I hope
>somebody can give me a hand.
>***** ERROR *****        TRNSYS ERROR # 103
>  UNIT   1 TYPE 140
>    7 INPUTS WERE SPECIFIED,  0 ARE REQUIRED
>  CHECK COMPONENT CONFIGURATION
>
>
>  ***** ERROR *****        TRNSYS ERROR # 103
>  UNIT   1 TYPE 140
>   26 PARAMETERS WERE SPECIFIED,  0 ARE REQUIRED
>  CHECK COMPONENT CONFIGURATION
>   140 STORAGE VARIABLES ALLOCATED FOR UNIT   1, TYPE 140 ENDING AT   141
>
>is TYPECK, RCHECK or OCHECK able to that the blame has it ?
>
>_______________________________________________
>TRNSYS-users mailing list
>TRNSYS-users at engr.wisc.edu
>https://www.cae.wisc.edu/mailman/listinfo/trnsys-users

****************************************************************************************
Thermal Energy System Specialists (TESS), LLC
David BRADLEY                           2916 Marketplace Drive - Suite 104
Partner                                        Madison, WI 53719
Phone: (608) 274-2577 USA
Fax: (608) 278-1475
E-mail: bradley at tess-inc.com
Web Pages:  http://www.tess-inc.com     and      http://www.trnsys.com

"Providing software solutions for today's energy engineering projects"
****************************************************************************************