AW: [TRNSYS-users] Problem with BUI file

[Torsten Welfonder]

Dear Olympia
the problem is that in TRNSYS 16 all used glazing data from the w4-lib.dat file is stored in the bui file to avoid
errors due to mixed libraries. In 15 the data was always taken from the w4-lib.dat file defined in the dck file.
Which could be by error different as the one you used in PREBID/trnbuild.

Now if you open a TRNSYS15 bui with Trnbuild you get this message.
I have to admit that this message could be more clearly.


You just have to check if all Window Types missing in the bui file= red marked windows on the left side 
are available and the correct once in the chosen window library=red marked windows on the right side
if all missing windows (left side)  are also listed on the right side in most cases every thing is ok.
To accept the chosen library click ok.

If you want to choose a different library modify the path for the WINID-LIB on the top first.
You might want to change the path if you work with your own library with the same winid numbers for different glazings.


With best regards,

Torsten Welfonder

--------------------------------------------------------------------------------------------------------------------
*  TRANSSOLAR Energietechnik GmbH    
*  Curiestrasse 2 
*  70563 Stuttgart 
*  Germany
*
*  Tel: 49 (0)711 67976-0                      
*  FAX: 49 (0)711 67976-11
* 
*  Mailto:Hotline at transsolar.com								  
*  http://www.transsolar.com								  
*  http://www.trnsys.de								  
--------------------------------------------------------------------------------------------------------------------
TRNSYS-Usertag 2005
When?		18.03.2005;  9.00 - 18.00 Uhr
Where?		Stuttgart
Language?	German and english
price?		€ 150,- per person before 31.12.2004 
		€ 210,- per person after 31.12.2004 + VAT

TRNSYS-courses 2005
course 1: 		Introduction into the work with TRNSYS
 		Price: € 990,- per person, + VAT
          		2./3.06.2005
course 2: 		Building Simulations with TRNSYS
		Price: € 990,- per person, + VAT
          		15./16.06.2005
course 4:		airflow simulation in buildings TRNFLOW
		Price: € 690,- per person, + VAT
          		17.06.2005
--------------------------------------------------------------------------------------------------------------------
TRNSYSlite 3.0 	more information about TRNSYSlite30 can be found at: http://www.trnsys.de/ts/english/softeng/tliteeng/tliteeng.htm.
--------------------------------------------------------------------------------------------------------------------
New: TRNSYS16    	more information about TRNSYS16 can be found at: http://www.trnsys.de/ts/english/softeng/trneng/trneng.htm.
--------------------------------------------------------------------------------------------------------------------
TRNFLOW 	more information about TRNFlow can be found at: http://www.trnsys.de/ts/english/softeng/floweng/floweng.htm.
--------------------------------------------------------------------------------------------------------------------
if you need any further information please contact hotline at transsolar.com.







-----Ursprüngliche Nachricht-----
Von: hotline 
Gesendet: Freitag, 14. Januar 2005 11:16
An: Torsten Welfonder
Betreff: WG: [TRNSYS-users] Problem with BUI file



-----Ursprüngliche Nachricht-----
Von: trnsys-users-bounces at engr.wisc.edu [mailto:trnsys-users-bounces at engr.wisc.edu] Im Auftrag von Olympia Zogou
Gesendet: Freitag, 14. Januar 2005 10:04
An: trnsys-users at engr.wisc.edu
Betreff: [TRNSYS-users] Problem with BUI file


Dear Trnsys users,

I have some problems to run an older TRNSYS 15 project, with TRNSYS 16. It is a building simulation project with type 56.
The proplem appears when the BUI FILE needs to be translated. 
The message I get is ' There are window types in Bui they are not defined in the WinID-Pool'. 
For this reason, I have tried to copy-paste the data of the special windows I use in the project, in all the respective files 
( PRGWIN.lib,  USR_WLAY.lib, USR_WIN .lib, usr_wall.lib,   USR_layer.lib,  W4-lib.dat  ) in the new library. 
But, still I get the same error message. 

Any hints would be welcome.

best regards 
 
Olympia

Dipl.-Ing. Olympia Zogou
Laboratory of Thermodynamics & Thermal Engines
Department of Mechanical & Industrial Engineering
University of Thessaly
Pedion Areos, 383 34 Volos, Greece
Tel. (+3024210) 74013, Fax (+3024210) 74096, 
E-mail: olyz at uth.gr
http://www.mie.uth.gr/labs/ltte/info/info.htm < Datei: ATT780113.txt >> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20050114/c417a3d0/attachment-0005.htm>