[TRNSYS-users] Command INQUIRE in TRNSYS16 type

Cédric Paulus cedric.paulus at clipsol.com
Wed Jan 26 00:04:30 PST 2005


Hi,
One of my dll was set to "Single-threaded DLL" and the other to "Debug
Single-threaded DLL". So, I've set both to "Single-threaded DLL" or to
"Debug Single-threaded DLL".
This fixes the problem.

Thanks a lot.
Cedric

-----Message d'origine-----
De : trnsys-users-bounces at engr.wisc.edu
[mailto:trnsys-users-bounces at engr.wisc.edu] De la part de Michaël Kummert
Envoyé : mercredi 26 janvier 2005 03:07
À : TRNSYS-users at engr.wisc.edu
Objet : Re: [TRNSYS-users] Command INQUIRE in TRNSYS16 type


Cédric,

> I am trying to update a TRNSYS15 type in TRNSYS16. The type is using 
> the
> command :
> INQUIRE(UNIT=124,OPENED=FLAG,NAME=FNAME)
> which returns a flag indicating if a file is connected and the name of 
> the file assigned at the logical unit LUP.
> FLAG is defined as LOGICAL
> FNAME is defined as CHARACTER*60
> In my deck, I have written :
> ASSIGN T:/xxxx/xxx/xxxxx.xx  124
> But when I run my simulation, the INQUIRE command returns me a False 
> flag and can't find any file.
> When I use my type in legacy mode, it founds the file and returns me a 
> true flag.
> Is this command already available ? Shall I use another command ?

INQUIRE is a Fortran statement so it is available to all (Fortran) 
TRNSYS Types. The fact that it tells you that the logical unit is not 
associated probably comes from a limitations of Fortran DLL's:

SHARING LOGICAL UNITS (FILES) BETWEEN DLL'S

Typical symptoms:
You assign a file in the TRNSYS input file and that file seems to be 
inaccessible to user-Types compiled in an external DLL.
- An "Inquire" statement tells you that the Logical Unit is not 
associated to a file
- Attempts to write to / read from the file create "fort.nnn" (where nnn 
is the logical unit)

Solution:
If a TRNSYS Type uses a file that is opened and closed by the kernel 
(i.e. a file managed through an "ASSIGN" statement in the deck, or an 
"External File" in a Studio proforma), the logical unit is associated to 
the actual file in TRNDll. If a Type that accesses the file is compiled 
into a separate DLL in UserLib:
- Both DLL's must be linked to the DLL form of the Fortran run-time 
libraries. Use "/libs:dll" in the command line, or set "Project 
Settings\Fortran\Libraries" to "Single-threaded DLL" in the Visual 
Studio ("Debug Single-threaded DLL" for debug configuration).
- Furthermore, all DLL's must be compiled in the same mode (Debug or 
Release). Note that by default TRNSYS is shipped with a Release 
TRNDll.dll, but a Debug DLL is available in "\Compilers\Cvf66\TRNDll\Debug".

Please let us know if this fixes your problem.

Michaël Kummert


-- 
_________________________________________________________

Michaël Kummert

Solar Energy Laboratory - University of Wisconsin-Madison
1303 Engr Res Bldg, 1500 Engineering Drive
Madison, WI 53706

Tel: +1 (608) 263-1589
Fax: +1 (608) 262-8464
E-mail: kummert at engr.wisc.edu

SEL Web Site: http://sel.me.wisc.edu
TRNSYS Web Site: http://sel.me.wisc.edu/trnsys
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at engr.wisc.edu
https://www.cae.wisc.edu/mailman/listinfo/trnsys-users





More information about the TRNSYS-users mailing list