[TRNSYS-users] file close error

[Bharath Krishna Karambakkam]

Hi Michaël and Rémi,
  Thank you for your responce. Getting rid of the Type155.dll from my
UserLib direcoty did solve my problem with the libmx.dll not found. But I
still get the file close error at the end of the simulation.Could you please
let me know what could be causing this. Please find attached the error
message in my previsous mail.
Thank you,
Krishna

----- Original Message ----- 
From: "Michaël Kummert" <michael.kummert at gmail.com>
To: <trnsys-users at engr.wisc.edu>
Sent: Thursday, December 15, 2005 1:30 PM
Subject: Re: [TRNSYS-users] libmx and file close error


> Krishna, Rémi,
>
>> I experienced this problem as well.  The file libmx.dll is associated 
>> with the Type 155 that helps trnsys communicate with matlab.  For some 
>> reason, the the .dll file that is for Type 155 calls this libmx.dll even 
>> if you don't have any reference to matlab in your program.  The only way 
>> I managed to eliminate the error is by removing the Type155 .dll from my 
>> program files.
>
> I believe that what you see is one of the problems that happens when you 
> update to 16.00.0038 without uninstalling your previous version first.
> I also believe the setup program prominently displays a warning about 
> that, but of course who reads warnings anyway?
> If that is the case you may end up with 2 versions of Type155.dll: one in 
> /Exe, the other one in /UserLib. You should delete the one in /UserLib.
>
> Loading Type155.dll is only possible if Matlab is installed on the 
> machine. For that reason, TRNSYS will only load Type155.dll if Type155 is 
> used in the deck. But in order to do that it has to know where to find 
> Type155.dll and handle it in a special way. If you have an extra copy of 
> Type155.dll in UserLib, TRNSYS will do what it does with any DLL there: it 
> first loads it to know which Types are in it, then it possibly unloads it 
> if the Types are not used in the deck. But if Matlab is not installed, it 
> fails at the first step.
>
> While we are at it, I also believe you will have an extra copy of 
> Type62.dll left in UserLib if you have updated to 16.00.0038 "improperly". 
> You should also delete that one if present. And if anyone still using 
> 16.00.0037 or an older version reads this, do not delete anything!
>
> Kind regards,
>
> Michaël Kummert
>
> _________________________________________________________________
>
> Michaël Kummert
>
> École Polytechnique de Montréal - Génie Mécanique
> Case Postale 6079, succursale Centre-Ville
> Montréal   QC   H3C 3A7
> Canada
>
> Tel: +1 (514) 340-4711, Ext. 3367
> Fax: +1 (514) 340-5917
> Email : michael.kummert à polymtl.ca
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at engr.wisc.edu
> https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
>