[TRNSYS-users] cycle in proforma

[Diego A. Arias]

Dear Laurent,

I think that it is not possible to dynamically size a cycle from zero.  
You have to consider that the proforma sends the information to the 
routine written in Fortran. If you specify n=0, Fortran won't allow you 
to size an array to zero.
I guess that you can create a different proforma and, therefore, another 
type for the case where this parameter is not needed.
I hope this helps.  Please let me know if you have other questions.

Diego

Laurent SERRES wrote:

> Hi TRNSYS users
> I'm creating a new type, and I have some problems.
> In the proforma file I want to create a cycle associated with a 
> parameter (n for example)
> The problem occurs when n=0.
> In this case in iisibat the input is asked one time (the same that if n=1)
> So when I call the typeck subprogram the number of inputs required 
> (considering n=0) is less than the number of inputs specified 
> (considering n=1).
>  
> Is there sommebody who knows the solution?
> Regards
> Laurent
>  
> Laurent SERRES
> IUT Génie Civil
> 3, Rue du Clos Courtel
> BP 90422
> 35704 RENNES CEDEX 7 FRANCE
> Tel: (33) 2 23 23 42 02
> Fax: (33) 2 23 23 40 51
> mèl: laurent.serres at univ-rennes1.fr 
> <mailto:laurent.serres at univ-rennes1.fr>
> web: http://perso.univ-rennes1.fr/laurent.serres
>
>------------------------------------------------------------------------
>
>_______________________________________________
>TRNSYS-users mailing list
>TRNSYS-users at engr.wisc.edu
>https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
>  
>


-- 

Diego A. Arias
TRNSYS Coordinator
Solar Energy Laboratory
University of Wisconsin - Madison
1500 Engineering Drive
Madison, WI 53706