[TRNSYS-users] Visual Fortran Runtime Error: Close Error called from Comisc_v16

[David Bradley]

Kendra,
   The error that you are getting is coming from Fortran when Type56 tries 
to close a file that for some reason, has been assigned the logical unit 
number "0." This should not happen and if you send me your project files, I 
will be happy to take a look at it. You can send them directly to 
bradley at tess-inc.com since TESS is your distributor.
Kind regards,
   David

At 04:01 PM 8/24/2005, Kendra L. Scott wrote:
>Hello,
>When I run my trnsys simulation I receive the following error at the last 
>time step: forrtl: severe (28): CLOSE error, unit 0, file "Unknown" I have 
>tried this simulation on 2 Windows XP machines and received the error 
>however on a Windows 2000 machine, the simulation completes the last time 
>step and exits with no errors.  I have attached a screen capture of the 
>Fortran Runtime error message.  Any insight would be greatly appreciated!
>
>--
>Kendra Scott
>Project Engineer
>CDH Energy Corporation
>P.O. Box 641
>132 Albany St.
>Cazenovia, NY 13035
>315-655-1063, 655-1058(fax)
>www.cdhenergy.com
>
>
>
>
>
>_______________________________________________
>TRNSYS-users mailing list
>TRNSYS-users at engr.wisc.edu
>https://www.cae.wisc.edu/mailman/listinfo/trnsys-users

****************************************************************************************
Thermal Energy System Specialists (TESS), LLC
David BRADLEY                           2916 Marketplace Drive - Suite 104
Partner                                        Madison, WI 53719
Phone: (608) 274-2577 USA
Fax: (608) 278-1475
E-mail: bradley at tess-inc.com
Web Pages:  http://www.tess-inc.com     and      http://www.trnsys.com

"Providing software solutions for today's energy engineering projects"
****************************************************************************************