[TRNSYS-users] trnsys15-type 56, 68, 34 solar control

[Isabelle BRUYERE]

Dear Xavier,

Another solution to connect  type 34 overhang to the building is trough the 
shading factor : select an input as a shading factor for the window and 
connect it to the correspondant output of type 34.

Best regards,

Isabelle


A 13:38 23/08/2005 +0200, Xavier Dequaire a écrit :
>HI all,
>
>I have used so far type 56 to describe a building (passive solar)
>Next step is to explore strategies to limit solar gains.
>
>There are some tools I found
>type 68 shading mask
>type 34  overhang and wing wall
>
>I did not find information on how to integrate this to my model
>Especially to put in relation a specific overhang to a specific window.
>
>As for sources of shadow due to distant objects and landscape, I assume I
>can use Meteonorm to generate a new weather file taking it into account
>for the solar radiation on the whole building.
>
>thanks for help
>Xavier D.
>
>
>
>
>_______________________________________________
>TRNSYS-users mailing list
>TRNSYS-users at engr.wisc.edu
>https://www.cae.wisc.edu/mailman/listinfo/trnsys-users

Isabelle Bruyère
Université Catholique de Louvain                        Place du Levant, 1 
à 1348 Louvain-la-Neuve
Unité d'architecture - Architecture et Climat           Tél : 010/47 21 38 
- Fax : 010/47 21 50
http://www-climat.arch.ucl.ac.be/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20050823/8ec6d3bf/attachment-0005.htm>