[TRNSYS-users] Cylindrical storage tank Type 534

[Timothy P. McDowell]

Marjorie -

The limit is not inside the type 534 code, but is in the plugin application 
used to create the data file for the type.  I have modified the plugin to 
correct this limit and I will be sending that to you in a separate email.

Regards,

Tim

At 06:52 AM 8/4/2005, you wrote:
>Hello,
>
>I am using type 534 (a clindrical storage tank with immersed heat 
>exchangers) but I saw that the tank volume is limited to 100 m3. It is a 
>problem for me because I have problems of temperature instability due to 
>the too small tank size. Why is it impossible to put a higher value? Are 
>there problems with equations or calculations?
>If it isn't the case, may I change something in the code in order not to 
>have volume limitations? How can I do it?
>
>Thank you in advance for your help.
>Regards,
>
>Marjorie
>
>_______________________________________________
>TRNSYS-users mailing list
>TRNSYS-users at engr.wisc.edu
>https://www.cae.wisc.edu/mailman/listinfo/trnsys-users

----------------------
Timothy P. McDowell
Thermal Energy System Specialists
2916 Marketplace Dr Suite 104
Madison, WI 53719
Phone: 608-274-2577
Fax: 608-278-1475
Mobile: 608-225-5250
Email: mcdowell at tess-inc.com
http://www.tess-inc.com