[TRNSYS-users] control cards - settings

[Michaël Kummert]

Florian,

> ,what is the different between the control card and the settings 
> (file-setting).
> It is necessary ,that the parameters of the both are the same?

The parameters you change through Assembly/Control Cards (or the 
"document icon") are directly and only applied to your current project.
The changes you make through File/Settings do NOT apply to open projects 
but will apply to all new projects created after the change.

Now, the part where it gets somewhat confusing is that some settings are 
only available through File/Settings. Those will apply immediately to 
open projects. The most visible example is the background color.

Settings do not need to be the same in both places.

I hope this helps,

Michaël


-- 
_________________________________________________________

Michaël Kummert

Solar Energy Laboratory - University of Wisconsin-Madison
1303 Engr Res Bldg, 1500 Engineering Drive
Madison, WI 53706

Tel: +1 (608) 263-1589
Fax: +1 (608) 262-8464
E-mail: kummert at engr.wisc.edu

SEL Web Site: http://sel.me.wisc.edu
TRNSYS Web Site: http://sel.me.wisc.edu/trnsys