[TRNSYS-users] parametric run

[Werner Keilholz]

Note that you can also control the creation of constants in IISiBat by 
locking / unlocking
variables in the parameters / inputs window. TRNSED constants will be 
automatically
created for all variables which are not locked if 'Write TRNSED 
commands' is ON in
the Global Cards window.

Werner


Michaël Kummert wrote:

> Isabelle,
>
>> I am trying a parametric run.  I am wondering if I'm doing things 
>> right. I create a trnsys file in IIsiBat. I open the so created  .dck 
>> file in TRNSHELL. I replace some equations by a CONSTANT statement 
>> and create my parametric table.
>> But if I make any modification in IIsiBat, when I come back into 
>> TRNSHELL, I have to do these two operations again. Is that right ? (I 
>> hope mu explanation is not too confused...)
>>
>
> Unfortunately you are correct. There is no way back to IISiBat once 
> you started editing a deck file in TRNSHELL (that is, there is a way 
> back but you loose most changes).
> Please note, however, that you can have CONSTANTS statements in 
> IISiBat. You just have to enter them by hand in the "Simulation Cards" 
> field in "Control Cards". You can use the constants in the project by 
> typing their name in an initial value or parameter field (after 
> setting the "type" to "string"). That way you can setup your 
> simulation completely in IISiBat and just use TRNSHELL to run the 
> parametric study.
>
> Kind regards,
>
> Michaël Kummert
>
>


-- 


  /    \____ Werner Keilholz, Software Development Group Leader
  \____/     CSTB Sophia Antipolis, SAIL
  /    \____ s-mail: BP 209, 06904 SOPHIA ANTIPOLIS,  F R A N C E
  \____/     phone: +33 (0)4 93 95 67 00 -- fax: +33 (0)4 93 95 67 33
  /    \____ Mailto:werner at cstb.fr -- ASPAM=antispamwpk42
  \____/     http://evl.cstb.fr/english/team/WK/werner.htm

WARNING : Email is not a reliable medium. Never asume that any 
          email you send is actual read by a human being.