[TRNSYS-users] Problem with TYPE190 (HYDROGEMS wind turbine)

[Michaël Kummert]

Todd,

> I'm using TRNSYS 15 with IISiBat 3 to build a model of a Remote Area Power 
> System (RAPS) with two different types of wind turbine (both modeled using 
> Type 190 from the HYDROGEMS library). The .dck file has no errors, but the 
> .lst file shows one error...
> 
>  ***** ERROR *****        TRNSYS ERROR #  71
>  LOGICAL UNIT FOR ASSIGN STATEMENT HAS BEEN PREVIOUSLY ASSIGNED
>  *|? File with WECS parameters? |1000 

It looks like you did not change the logical unit number (par(7)) in 
Type 190. All logical unit numbers must be given a unique value.

I hope this helps,

Michaël Kummert

-- 
_________________________________________________________

Michaël Kummert

Solar Energy Laboratory - University of Wisconsin-Madison
1303 Engr Res Bldg, 1500 Engineering Drive
Madison, WI 53706

Tel: +1 (608) 263-1589
Fax: +1 (608) 262-8464
E-mail: kummert at engr.wisc.edu

SEL Web Site: http://sel.me.wisc.edu
TRNSYS Web Site: http://sel.me.wisc.edu/trnsys