[TRNSYS-users] Increasing value
Michaël Kummert
kummert at engr.wisc.edu
Fri Oct 8 14:38:15 PDT 2004
Jamyang,
> Thanks for your kind help. It really works but the problem is that the
> value should go on increasing every next cycle. I tried this by using
> equation and multiplying with the forcing functions. However, it still
> retains the same value. So is there any way that the value can be steped
> up every next cycle using forcing functions.
If I understand correctly what you are trying to do, using an equation
is one way of doing it, indeed. Please take a look at the attached
project where the value of the load increases each day. You can easily
adapt it to different increase rates. You can also set the
multiplication factor through another Type14 to obtain patterns if you need.
I hope this helps,
Michaël Kummert
--
_________________________________________________________
Michaël Kummert
Solar Energy Laboratory - University of Wisconsin-Madison
1303 Engr Res Bldg, 1500 Engineering Drive
Madison, WI 53706
Tel: +1 (608) 263-1589
Fax: +1 (608) 262-8464
E-mail: kummert at engr.wisc.edu
SEL Web Site: http://sel.me.wisc.edu
TRNSYS Web Site: http://sel.me.wisc.edu/trnsys
-------------- next part --------------
A non-text attachment was scrubbed...
Name: loads2.zip
Type: application/zip
Size: 7344 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20041008/91b1a735/attachment-0001.zip>
More information about the TRNSYS-users
mailing list