[TRNSYS-users] type 4 storage tank

[Florian Hafner]

hi users,

i have problems with the use of type 4e storage tank ( trnsys15).
the first message is :

***** WARNING *****
  THE SET POINT TEMERATURE OF THE UNIT  37 TYPE 4 STORAGE TANK IS HIGHER 
THAN
  THE BOILING TEMPERATURE.  THE BOILING TEMPERATURE WILL BE USED AS THE SET
  POINT.

but my boiling temperature is 100 and my set point temp. 55 or 0 , cause 
i do not use the aux heater.
the seond message is:

***** ERROR *****        TRNSYS ERROR # 103
 UNIT  37 TYPE   4
  24 PARAMETERS WERE SPECIFIED, 22 ARE REQUIRED
 CHECK COMPONENT CONFIGURATION
    8 STORAGE VARIABLES ALLOCATED FOR UNIT  37, TYPE   4 ENDING AT   641


 ***** ERROR *****        TRNSYS ERROR # 103
 UNIT  37 TYPE   4
 BAD PARAMETER OR NUMBER OF PARAMETERS
 CHECK COMPONENT CONFIGURATION

......
is there a max. number of type 4 in one simulation? i´m using  5.

maybe ,you could help me

thanks
flo