[TRNSYS-users] range check error

Phine cck95008879 at hotmail.com
Sun Jul 4 21:23:48 PDT 2004


Dear TRNSYS Users,

 

I have created a quite complex (80 zones) multi-zone building model. I try
to run a simple dck file to make sure my bui works, however it doesn't.

The error message is TRNSYS range check error, I wanted to know that how can
I know where gone wrong? I tried to use trace command but it appears to me
that 

The error occurs before anything can be traced. ANY IDEA?

And I also want to ask, is there any method to model more than 1000 surfaces
in a bui file? Prebid stop work after surface no 1001.

 

The attached files are the bui and dck I created. Thanks in advance.

 

Regards,

 

Joseph Cheung

School of Architecture and buildings

Deakin University

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20040705/cc65e207/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Projet1.dck
Type: application/octet-stream
Size: 11291 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20040705/cc65e207/attachment-0010.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: match3.bui
Type: application/octet-stream
Size: 145069 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20040705/cc65e207/attachment-0011.obj>


More information about the TRNSYS-users mailing list