[TRNSYS-users] Electrolyzer Current

[Sharath]

Dear Trnsys Users,

I am Sharath Nellutla working on a ICE system where I want to control the
system in such a way that IC engine should not operate when electrolyser is
on and vice versa. when I did the simulation got results where the
electrolyser is withdrawing current at certain voltage even though the
signal sent to the electrolyser is zero but the power produced is zero. The
current withdrawn by electrolyser is producing a sufficient voltage drop in
the system. Please help me regarding this.

The results are

 TIME        IELY_OUT           UELY            PTOT            VDOT_H2
cntrl3      
+1.15000E+01    +6.71778E-01    +1.62609E+01    +0.00000E+00    +0.00000E+00
+0.00000E+00
+1.15167E+01    +1.84053E+00    +1.91516E+01    +3.52490E+01    +8.07573E-03
+1.00000E+00

+1.15333E+01    +2.50888E+00    +1.61468E+01    +0.00000E+00    +0.00000E+00
+0.00000E+00

+1.15500E+01    +3.98230E+00    +2.00780E+01    +7.99565E+01    +2.08001E-02
+1.00000E+00
+1.15667E+01    +4.34614E+00    +1.61480E+01    +0.00000E+00    +0.00000E+00
+0.00000E+00
+1.15833E+01    +6.11406E+00    +2.06213E+01    +1.26080E+02    +3.29147E-02
+1.00000E+00

Thanks,
Sharath N
312 mail stop ,
Mechanical Engineering Department,
University Of Nevada,Reno