[Simergy-users] Heat Recovery Chiller

[Richard See]

Eddie,

 

1)      This is a good idea, but currently we are not able to do this.
However, we are able to import and use pre-existing schedules in IDF format.

2)      I will pass this one over to one of our experts, but I suspect that
this is not yet supported.  He will get back to you on this one.

 

Regards,

Simergy Beta Test Program

 <mailto:SimergyBetaProgram at DigitalAlchemyPro.com>
SimergyBetaProgram at DigitalAlchemyPro.com

 <http://www.DigitalAlchemyPro.com> www.DigitalAlchemyPro.com

 

From: Simergy-users [mailto:simergy-users-bounces at lists.onebuilding.org] On
Behalf Of Eddie Ortiz
Sent: Tuesday, December 15, 2015 1:22 PM
To: simergy-users at lists.onebuilding.org
Subject: [Simergy-users] Heat Recovery Chiller

 

Good afternoon,

 

I am new to using Simergy and have a couple questions to regarding Simergy
and its capabilities.

 

1). Is there a way to import an excel file to serve as a schedule?

2). Is there a way to model a heat recovery chiller? I can't seem to set a
hot water loop on my condenser side. 

 

Any help is appreciated. 

 

Thanks,

 

Eddie Ortiz

Mechanical Design Engineer

 

P2S Engineering, Inc.

5000 East Spring Street, 8th Floor

Long Beach, CA 90815-5218

T 562.497.2999  F 562.497.2990

 <http://www.p2seng.com/> www.p2seng.com

 



Los Angeles Business Journal Best Places to Work 2009-2013

PSMJ Circle of Excellence Firm 2009-2011

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/simergy-users-onebuilding.org/attachments/20151215/93b65f3d/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 5361 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/simergy-users-onebuilding.org/attachments/20151215/93b65f3d/attachment.png>