[Hap-users] HAP - Energy simulation

[ARUNSHANKAR]

Hi Hap Users,

 

I have been modelling the two identical spaces with the following options. 

 

Option 1:          Roof - Exposed, Floor - Above conditioned space

Option 2:          Roof - Exposed, Floor - Above Unconditioned space

 

But I face the dramatical issue in HAP. That the point is below,

 

 

I.	The Peak design result that is total coil load from the HAP Option 2
is higher than the Option 1. I agreed. 

 

II.	But I have noticed the total coil load Hourly simulation & Monthly
simulation from HAP Option 2 is lower than the Option 1 at all month except
peak month (May & June). The peak month also not huge difference between the
Option 2 & Option 1.

 

The above queries I made the assumption the HAP simulation will not
considered the Option 1 Floor above A/C space design condition. I think so
that is take the outdoor weather condition. In this case how to model the
Floor - Above conditioned space.

 

I have the lot confusion to conclude the above queries. Any one please gives
me the clear picture.    

 

 

 

Thanks & Regards,

Arun shankar

Cell: 91-9600034602

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/hap-users-onebuilding.org/attachments/20171116/087f6537/attachment.htm>