[Equest-users] Energy Efficiency Measure Wizard

[Brian Fountain]

The EEM Wizard only manipulates wizard inputs.  So, by moving to the detailed interface (as you almost always need to do), the EEM Wizard is not available to you.  

However, there is a parametric run creator in the detailed interface that can modify virtually any single DOE-2 keyword or combination of keywords in the model. 

The one thing the detailed interface parametric  run tool cannot do is create something new. But it can enable and disable model elements.   Suppose you wanted to run your model with a comparing an electric with a natural gas fired boiler.  Both the gas and electric boilers must be defined in the base model.  However the electric boiler could carry the building load in the baseline either using an EQUIPMENT CONTROL or through boiler sizing. In the parametric run, the EQUIPMENT CONTROL or boiler sizes can be modified to operate the natural gas fired boiler. The grid view button at the bottom of the parametric run screen is helpful for seeing all keyword changes for all parametric runs.

Brian

On Feb 28, 2025, 4:42 p.m., at 4:42 p.m., Margaret Stadlman via Equest-users <equest-users at lists.onebuilding.org> wrote:
>Good afternoon, I have finished my building model and would like to run
>comparisons in the Energy Efficiency Measure Wizard,  get this message:
>
>[cid:image005.png at 01DB89FE.9BD1D480]
>
>As I have made edits to my model in detail mode, does this mean I am
>not able to run EEM without breaking my model?
>
>Thank you
>
>[cid:image001.png at 01DB89FE.541D0C90]<https://thriven.design/>
>Margaret Stadlman
>Engineering Contributor
>________________________________
>mstadlman at thriven.design<mailto:mstadlman at thriven.design>
>t: 856.854.1880 x128<tel:856.854.1880%20x128> | d:
>856.559.2028<tel:856.559.2028>
>756 Haddon Ave. Collingswood, NJ 08108
>[cid:image002.png at 01DB89FE.541D0C90]<https://www.linkedin.com/company/thrivendesign>
>[cid:image003.png at 01DB89FE.541D0C90]
><https://www.instagram.com/thriven.design/>   
>[cid:image004.png at 01DB89FE.541D0C90]
><https://www.facebook.com/thriven.design/>
>thriven.design<https://thriven.design/>
>
>
>
>------------------------------------------------------------------------
>
>_______________________________________________
>Equest-users mailing list
>http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
>To unsubscribe from this mailing list send  a blank message to
>EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20250228/65aa5055/attachment.htm>