[Equest-users] Heat Pump Chiller with 2-Pipe Loop

[Ahmad Fraij]

Hello All,
I have added heat pump air cooled chiller to my model and I have identified the loop to be 2-pipe loop but when I run the simulation, I get the following error. Can any one help suggest what would be the reason for this error. The PD2 and INP files are attached.



Regards
Ahmad
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20230829/d6f0420d/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 1693295419201blob.jpg
Type: image/png
Size: 9978 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20230829/d6f0420d/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: WH.inp
Type: application/octet-stream
Size: 748554 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20230829/d6f0420d/attachment.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: WH.pd2
Type: application/octet-stream
Size: 88484 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20230829/d6f0420d/attachment-0001.obj>