[Equest-users] equest: occupancy schedule in Airport

[John Aulbach]

 Lonstatina:
If you finally get your model to the Detail Edit mode, you can input a different schedule for each space. I don't think the Wizard modes will allow that.
THEN you can give each space a different people, light, equip schedule.
Try that.
John R. AulbachREALLY retired eQuest Guy
    On Wednesday, March 13, 2019, 5:33:14 AM PDT, Konstantina Kalliakoudi via Equest-users <equest-users at lists.onebuilding.org> wrote:  
 
 Dear all,I have following issue I am modeling a terminal airport in equest.I have entered the maximum number of people in each space and I want to modify the schedules.The situation is following:The schedules vary significant at each month.Each space has a different day time where the peak number of people occur. This happens because the passenger are continiously moving from each space to another, for example from check in to the boarding gates.Each space has it's own AHU with a minimum Ooutside Air Control Method: DCV Return Sensor
My questions are following:1)  Τhe number of people affect the energy consumption of each AHU. Each zone will NOT  simultaneouslyhave the maximum number of people (peak). How can I enter this time differnece. Most each zone has each own schedule?
Thank youKonstantina K.Mechanical Engineer



_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20190313/1e672d23/attachment.html>