[Equest-users] Hourly space temperature after cooling

[Integral Mechanical Engineering Designs]

Hi David,

Thanks for the answer. I don´t think that explain the data because the system is working most of the time during the year, and a note in the SS-O report shows that the temperature counts are made only for the hours when the fans are on. The cooling schedule matches with the  occupancy schedule.
[cid:image002.png at 01D4E17B.EA656E90]
The set point is 75 °F and the throttle range is 2 °R.
[cid:image003.png at 01D4E17C.85F7A260]
The BEPS report shows that are 155 unmet hours, but the SS-O report gives a value of at least 2505 (adding from 80-85 and above 85).

Kind Regards,

Paul Caicedo

Mechanical Engineering Consultant



IntegralMECH


From: David Eldridge <DEldridge at grummanbutkus.com>
Sent: March 22, 2019 9:29 AM
To: Integral Mechanical Engineering Designs
Subject: RE: Hourly space temperatura after cooling


That SS-O report should be after cooling (it’s a “system” report), but it may include some hours when the control system is in setback – it’s not only for occupied hours, would that explain your data?



There is a separate module for report variables that you can specify to document any number of internal calculations, including one or more space temperatures – it’s been a while since I set one of those up but if you search this community for “report variables” some instructions should pop up.



These can then also be exported to excel, or printed in the *.sim report.



David





David S. Eldridge, Jr., P.E., LEED AP BD+C, BEMP, BEAP, HBDP

Associate



Direct: (847) 316-9224 | Mobile: (773) 490-5038



Grumman/Butkus Associates | 820 Davis Street, Suite 300 | Evanston, IL 60201

Energy Efficiency Consultants and Sustainable Design Engineers



grummanbutkus.com<http://grummanbutkus.com/> | Blog<http://grummanbutkus.com/blog> | Facebook<https://www.facebook.com/pages/GrummanButkus-Associates/1385285015032526> | Twitter<https://twitter.com/grummanbutkus>



From: Equest-users [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Integral Mechanical Engineering Designs via Equest-users
Sent: Friday, March 22, 2019 8:51 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Hourly space temperatura after cooling



Hi all,



If I open the BEPS Building Energy Performance, there are 155 unmet hours. I would like to get the temperature values throughout the year after cooling, but the only related option that I can see is the SS-O Space Temperature Summary where the temperatures above the set point are much more than the unmet hours. It seems that is the report of the space before cooling.



How could I get the space temperature after cooling to have relation with the unmet hours?



Kind Regards,

Paul Caicedo

Mechanical Engineering Consultant



IntegralMECH
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20190323/246f5254/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: A6FE3A2C00F14E68B18558C2EC3FBA92.png
Type: image/png
Size: 14382 bytes
Desc: A6FE3A2C00F14E68B18558C2EC3FBA92.png
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20190323/246f5254/attachment-0009.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 68AC419D4B514F1BB27B48ADFC7D30A2.png
Type: image/png
Size: 5238 bytes
Desc: 68AC419D4B514F1BB27B48ADFC7D30A2.png
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20190323/246f5254/attachment-0010.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: CA72368B6B9144E8BA0C53AA3D33D44C.png
Type: image/png
Size: 144 bytes
Desc: CA72368B6B9144E8BA0C53AA3D33D44C.png
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20190323/246f5254/attachment-0011.png>