[Equest-users] Unit Heaters and RTUs serving the same zone

[Civitillo, Victoria]

Hi all,

I am in the process of modeling a gymnasium that is served by two system types and I'm looking for the best way to model it. RTUs serve the space for cooling and ventilation purposes while hot water unit heaters supply the heating. The ventilation air from the RTUs tempered to 65degF during the heating months. Trying to figure out if there is a way to model it as a single system? I originally thought I could just mimic the RTU heating coil as the unit heater heating coil but got a ton of unmet hours. I have taken a powered induction unit with preheat as the approach now which has nixed my unmet hours but skyrocketed my heating energy consumption. Open to suggestions!

Thanks in advance,
Victoria


Victoria (Tsamis) Civitillo, PE, CEM, LEED AP BD+C, WELL AP
Sustainability Project Manager
 Direct: (212) 330-6165

Stantec Consulting Services Inc.
475 Fifth Avenue 12th Floor
New York NY 10017-7239 US
[Stantec]<http://www.stantec.com/>


The content of this email is the confidential property of Stantec and should not be copied, modified, retransmitted, or used for any purpose except with Stantec's written authorization. If you are not the intended recipient, please delete all copies and notify us immediately.

? Please consider the environment before printing this email

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20190626/c4a784df/attachment-0001.htm>