[Equest-users] Zones with different roof height on same floor

equest user equestuser00 at gmail.com
Mon Jul 30 23:25:10 PDT 2018

Sure  John.

Thats what I am planning to do now.


On Tue, Jul 31, 2018 at 1:45 AM, John Aulbach <jra_sac at yahoo.com> wrote:

> A quickie from me. Make each zone a different shell. Then, I believe, you
> can do your different roof heights. Detail Edit Mode is best. Sorry i do
> not have time to create an example.
> John R. Aulbach, PE
> On Monday, July 30, 2018, 3:43:05 AM PDT, equest user via Equest-users <
> equest-users at lists.onebuilding.org> wrote:
> Hi all Modelers,
> This time I have come across a single floor building which has zones with
> different height. I have attached a roughly drawn elevation as an example
> (Which is not needed :/) . Can any1 guide me how to model such case as
> equest allows you to take same height for single floor.
> Thanks,
> Tejas
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20180731/a55a1bd7/attachment.html>

More information about the Equest-users mailing list