[Equest-users] Zones with different roof height on same floor

[equest user]

Jing,



So are you saying that creating zones as different shells may lead to
erroneous outputs later? Can u elaborate on what were the things which made
you realize the output didn't made sense.



I am quite comfortable with both the ways you mentioned.



Thanks,

Tejas

On Tue, Jul 31, 2018 at 3:31 AM, Jing Hong <hongjing.shirley at gmail.com>
wrote:

> Hi Tejas,
>
> I had a similar project like yours. I tried to make different shells with
> different heights at the first place and the simulation output didn't make
> sense. Then I tried to make one shell in the Wizard Data Edit, and then
> switch to Detailed Data Edit. In the Building Shell tab, I edited the
> height in Floor Properties. If there are some zones with different height.
> You may need to create new exterior or interior walls to fix it. The model
> turned out very well.
> [image: image.png]
>
> Jing
>
>
> On Mon, Jul 30, 2018 at 5:43 AM equest user via Equest-users <
> equest-users at lists.onebuilding.org> wrote:
>
>> Hi all Modelers,
>>
>> This time I have come across a single floor building which has zones with
>> different height. I have attached a roughly drawn elevation as an example
>> (Which is not needed :/) . Can any1 guide me how to model such case as
>> equest allows you to take same height for single floor.
>>
>> Thanks,
>> Tejas
>> _______________________________________________
>> Equest-users mailing list
>> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
>> To unsubscribe from this mailing list send  a blank message to
>> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>>
>
>
> --
> PhD Candidate, LEED AP BD+C
>
> School of Architecture and Urban Planning
> University of Wisconsin-Milwaukee
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20180731/c2f53c9b/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 27947 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20180731/c2f53c9b/attachment-0004.png>