[Equest-users] Zones with different roof height on same floor

[Jing Hong]

Hi Tejas,

I had a similar project like yours. I tried to make different shells with
different heights at the first place and the simulation output didn't make
sense. Then I tried to make one shell in the Wizard Data Edit, and then
switch to Detailed Data Edit. In the Building Shell tab, I edited the
height in Floor Properties. If there are some zones with different height.
You may need to create new exterior or interior walls to fix it. The model
turned out very well.
[image: image.png]

Jing


On Mon, Jul 30, 2018 at 5:43 AM equest user via Equest-users <
equest-users at lists.onebuilding.org> wrote:

> Hi all Modelers,
>
> This time I have come across a single floor building which has zones with
> different height. I have attached a roughly drawn elevation as an example
> (Which is not needed :/) . Can any1 guide me how to model such case as
> equest allows you to take same height for single floor.
>
> Thanks,
> Tejas
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>


-- 
PhD Candidate, LEED AP BD+C

School of Architecture and Urban Planning
University of Wisconsin-Milwaukee
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20180730/288575e2/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 27947 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20180730/288575e2/attachment-0004.png>