[Equest-users] LEED v4 Data center energy modelling

equest user equestuser00 at gmail.com
Thu Jul 19 06:02:05 PDT 2018


Hi all Energy Modelers,



Hope everyone is doing well.



I have been working on Energy modeling for LEED ratings like NC, CS.



However this time I have come across *LEED  V4 Datacenters *rating in which
the modeling strategy is quite different.



As far as the reference guidelines say I have to make three models *(Model
1: Baseline with full IT loads, Model 2: Proposed with full IT loads, Model
3: Proposed with Initial IT loads).* However the 5% mandatory savings
mentioned has to be calculated by comparing models 1 and 2.



I have few queries which are bulleted below

·         I am not quite sure why is there a need for model 3. I guess it
has to do something with PUE calculations. Can anyone help me out how model
3 will be used?

·         What is the intent behind PUE calculations? PUE values of which
models are to be calculated and why?

·         What are the important points need to be followed for datacenter
modeling?



Also I would like if anyone has any Methods/suggestions regarding the
energy simulation methodology.



I would be using eQUEST for this purpose.



Eagerly waiting for reply



Thanks & Regards,

Vishal
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20180719/57a8aedf/attachment-0002.htm>


More information about the Equest-users mailing list