[Equest-users] Zones with different roof height on same floor

[Jing Hong]

Hi Tejas,

Sorry I don't have the output report with errors with me now. I asked the
same question as you a couple of months ago. Friendly eQuest users
suggested me several options. After trying, for my case, creating in one
shell and modifying heights in detail mode turns out to be the simplest and
best solution.

Jing

On Tue, Jul 31, 2018 at 1:08 AM equest user <equestuser00 at gmail.com> wrote:

> Jing,
>
>
>
> So are you saying that creating zones as different shells may lead to
> erroneous outputs later? Can u elaborate on what were the things which made
> you realize the output didn't made sense.
>
>
>
> I am quite comfortable with both the ways you mentioned.
>
>
>
> Thanks,
>
> Tejas
>
> On Tue, Jul 31, 2018 at 3:31 AM, Jing Hong <hongjing.shirley at gmail.com>
> wrote:
>
>> Hi Tejas,
>>
>> I had a similar project like yours. I tried to make different shells with
>> different heights at the first place and the simulation output didn't make
>> sense. Then I tried to make one shell in the Wizard Data Edit, and then
>> switch to Detailed Data Edit. In the Building Shell tab, I edited the
>> height in Floor Properties. If there are some zones with different height.
>> You may need to create new exterior or interior walls to fix it. The model
>> turned out very well.
>> [image: image.png]
>>
>> Jing
>>
>>
>> On Mon, Jul 30, 2018 at 5:43 AM equest user via Equest-users <
>> equest-users at lists.onebuilding.org> wrote:
>>
>>> Hi all Modelers,
>>>
>>> This time I have come across a single floor building which has zones
>>> with different height. I have attached a roughly drawn elevation as an
>>> example (Which is not needed :/) . Can any1 guide me how to model such case
>>> as equest allows you to take same height for single floor.
>>>
>>> Thanks,
>>> Tejas
>>> _______________________________________________
>>> Equest-users mailing list
>>> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
>>> To unsubscribe from this mailing list send  a blank message to
>>> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>>>
>>
>>
>> --
>> PhD Candidate, LEED AP BD+C
>>
>> School of Architecture and Urban Planning
>> University of Wisconsin-Milwaukee
>>
>>
>

-- 
PhD Candidate, LEED AP BD+C

School of Architecture and Urban Planning
University of Wisconsin-Milwaukee
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20180802/87a5f57f/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 27947 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20180802/87a5f57f/attachment-0004.png>