[Equest-users] Floor Plans are not identical, how to apply that in Building Shell?

Jing Hong hongjing.shirley at gmail.com
Mon Oct 30 15:30:35 PDT 2017


Correct. The second floor is smaller and have an extra space as an overhang
above first floor’s patio.

Jing

On Mon, Oct 30, 2017 at 5:28 PM John Aulbach <jra_sac at yahoo.com> wrote:

>
> Jing:
>
> You perceive well. You are mostly correct. I assume your 2nd floor will be
> smaller than your 1st floor. You were commenting on floor area differences,
> correct?
>
> Is Madera German restaurant still in existance? I am originally from
> CHICAGO.
>
> Sent from Yahoo Mail on Android
> <https://overview.mail.yahoo.com/mobile/?.src=Android>
>
> On Mon, Oct 30, 2017 at 3:03 PM, Jing Hong
> <hongjing.shirley at gmail.com> wrote:
>
> Thanks John!
>
> So do you mean : I need to create two shells under Bldg Shell Components
> and make the distance from reference shell as 0ft? For each shell, the
> number of floors will be 1?
>
> Jing
>
> On Mon, Oct 30, 2017 at 4:52 PM, John Aulbach via Equest-users <
> equest-users at lists.onebuilding.org> wrote:
>
> Sir:
>
> You convert the model to the Design Development Wizard . Here you can do
> floor by floor different zoning or building configuration.
>
> Good luck !!
>
> John R Aulbach, PE
>
> Sent from Yahoo Mail on Android
> <https://overview.mail.yahoo.com/mobile/?.src=Android>
>
> On Mon, Oct 30, 2017 at 2:42 PM, Jing Hong via Equest-users
>
> <equest-users at lists. onebuilding.org <equest-users at lists.onebuilding.org>>
> wrote:
>
> Dear All,
>
> A two-floor office has two different floor floor for the first floor and
> second floor. How to make the model closed to the real condition in
> Schematic Design Wizard?
>
> Thanks,
>
> Jing
>
> --
> PhD Candidate, LEED AP BD+C
>
> School of Architecture and Urban Planning
> University of Wisconsin-Milwaukee
>
> ______________________________ _________________
> Equest-users mailing list
> http://lists.onebuilding.org/ listinfo.cgi/equest-users- onebuilding.org
> <http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org>
> To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE@
> ONEBUILDING.ORG <EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG>
>
>
> ______________________________ _________________
> Equest-users mailing list
> http://lists.onebuilding.org/ listinfo.cgi/equest-users- onebuilding.org
> <http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org>
> To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE@
> ONEBUILDING.ORG <EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG>
>
>
>
>
>
> --
> PhD Candidate, LEED AP BD+C
>
> School of Architecture and Urban Planning
> University of Wisconsin-Milwaukee
>
> --
PhD Candidate, LEED AP BD+C

School of Architecture and Urban Planning
University of Wisconsin-Milwaukee
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20171030/c8957964/attachment.html>


More information about the Equest-users mailing list