[Equest-users] Floor Plans are not identical, how to apply that in Building Shell?

[John Aulbach]

Jing:
You perceive well. You are mostly correct. I assume your 2nd floor will be smaller than your 1st floor. You were commenting on floor area differences, correct?
Is Madera German restaurant still in existance? I am originally from CHICAGO.
Sent from Yahoo Mail on Android 
 
  On Mon, Oct 30, 2017 at 3:03 PM, Jing Hong<hongjing.shirley at gmail.com> wrote:   Thanks John! 
So do you mean : I need to create two shells under Bldg Shell Components and make the distance from reference shell as 0ft? For each shell, the number of floors will be 1?
Jing
On Mon, Oct 30, 2017 at 4:52 PM, John Aulbach via Equest-users <equest-users at lists.onebuilding.org> wrote:

Sir:
You convert the model to the Design Development Wizard . Here you can do floor by floor different zoning or building configuration.
Good luck !!
John R Aulbach, PE

Sent from Yahoo Mail on Android 
 
  On Mon, Oct 30, 2017 at 2:42 PM, Jing Hong via Equest-users<equest-users at lists. onebuilding.org> wrote:   Dear All,
A two-floor office has two different floor floor for the first floor and second floor. How to make the model closed to the real condition in Schematic Design Wizard?
Thanks,
Jing

-- 
PhD Candidate, LEED AP BD+C
School of Architecture and Urban PlanningUniversity of Wisconsin-Milwaukee
______________________________ _________________
Equest-users mailing list
http://lists.onebuilding.org/ listinfo.cgi/equest-users- onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE@ ONEBUILDING.ORG
  

______________________________ _________________
Equest-users mailing list
http://lists.onebuilding.org/ listinfo.cgi/equest-users- onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE@ ONEBUILDING.ORG





-- 
PhD Candidate, LEED AP BD+C
School of Architecture and Urban PlanningUniversity of Wisconsin-Milwaukee
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20171030/43f6130c/attachment.html>