[Equest-users] Floor Plans are not identical, how to apply that in Building Shell?

[Jing Hong]

Thanks John!

So do you mean : I need to create two shells under Bldg Shell Components
and make the distance from reference shell as 0ft? For each shell, the
number of floors will be 1?

Jing

On Mon, Oct 30, 2017 at 4:52 PM, John Aulbach via Equest-users <
equest-users at lists.onebuilding.org> wrote:

> Sir:
>
> You convert the model to the Design Development Wizard . Here you can do
> floor by floor different zoning or building configuration.
>
> Good luck !!
>
> John R Aulbach, PE
>
> Sent from Yahoo Mail on Android
> <https://overview.mail.yahoo.com/mobile/?.src=Android>
>
> On Mon, Oct 30, 2017 at 2:42 PM, Jing Hong via Equest-users
> <equest-users at lists.onebuilding.org> wrote:
> Dear All,
>
> A two-floor office has two different floor floor for the first floor and
> second floor. How to make the model closed to the real condition in
> Schematic Design Wizard?
>
> Thanks,
>
> Jing
>
> --
> PhD Candidate, LEED AP BD+C
>
> School of Architecture and Urban Planning
> University of Wisconsin-Milwaukee
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>


-- 
PhD Candidate, LEED AP BD+C

School of Architecture and Urban Planning
University of Wisconsin-Milwaukee
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20171030/eb4d74a9/attachment-0002.htm>