[Equest-users] Floor Plans are not identical, how to apply that in Building Shell?

[John Aulbach]

Sir:
You convert the model to the Design Development Wizard . Here you can do floor by floor different zoning or building configuration.
Good luck !!
John R Aulbach, PE

Sent from Yahoo Mail on Android 
 
  On Mon, Oct 30, 2017 at 2:42 PM, Jing Hong via Equest-users<equest-users at lists.onebuilding.org> wrote:   Dear All,
A two-floor office has two different floor floor for the first floor and second floor. How to make the model closed to the real condition in Schematic Design Wizard?
Thanks,
Jing

-- 
PhD Candidate, LEED AP BD+C
School of Architecture and Urban PlanningUniversity of Wisconsin-Milwaukee
_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20171030/ae75f589/attachment-0005.htm>
-------------- next part --------------
_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG