[Equest-users] Chiller curves for ASHRAE 90.1 2010

[Harshul Singhal via Equest-users]

I would suggest to use the values from the given reference manual: http://www.pnnl.gov/main/publications/external/technical_reports/PNNL-25130.pdf

I don’t use eQuest these days but a cross-check will be helpful to generate the correct energy consumption figures.

Harshul Singhal LEED AP BD+C, CMVP
Building Energy Modeling Analyst
psdconsulting.com<http://psdconsulting.com/>


From: Equest-users [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Rathna Shree via Equest-users
Sent: Friday, May 05, 2017 6:28 AM
To: Equest-users <equest-users at lists.onebuilding.org>
Subject: [Equest-users] Chiller curves for ASHRAE 90.1 2010

Dear All,

Can we use the default chiller curves available in Equest while constructing the baseline case using ASHRAE 90.1 2010?

Since the IPLV changes from previous ASHRAE standard, is it required to change the part load curve?

Regards,
Rathnashree
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20170505/790522eb/attachment-0002.htm>