[Equest-users] Chiller curves for ASHRAE 90.1 2010

Rathna Shree via Equest-users equest-users at lists.onebuilding.org
Fri May 5 03:28:27 PDT 2017


Dear All,
Can we use the default chiller curves available in Equest while constructing the baseline case using ASHRAE 90.1 2010? 
Since the IPLV changes from previous ASHRAE standard, is it required to change the part load curve?
Regards,Rathnashree
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20170505/b0e96ae3/attachment.htm>


More information about the Equest-users mailing list