[Equest-users] Tools for schematic energy modeling?

[Gurneet Singh via Equest-users]

Hi Michael,

You can give a try to Openstudio. Its Sketchup plugin will help in creating
geometry and PAT module will help in evaluating various design options.

Regards


Gurneet Singh
Director

Environmental Design Solutions Pvt. Ltd.
D-1/25, Vasant Vihar, New Delhi 110057

[m] +91 9899240140    [t] +91 11 2614 7085    [f] +91 11 4056 8633
gurneet at edsglobal.com | www.edsglobal.com

On Mon, May 1, 2017 at 7:48 PM, Michael Campbell via Equest-users <
equest-users at lists.onebuilding.org> wrote:

> Hello eQUEST Users,
>
> I'm working on a project and need to do some early schematic energy
> modeling for early design decisions regarding envelope components,
> orientation, etc.
>
> At this point, there is a basic footprint and general space layout but
> very little detail.  And it is very likely that the floor plans will change
> significantly between now and final design documents.
>
> I'm wondering if anyone has any tools or recommendations for doing early
> schematic energy modeling like this?
>
> Thank you,
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20170501/03c03028/attachment-0002.htm>