[Equest-users] Modeling ERVs that use air from multiple zones

[Saaf, Paula via Equest-users]

Hi All,

How do you model an ERV that is using exhaust air from toilet exhaust that comes from multiple zones?  The toilets are in zones that are associated with different AHUs.  The ERV is providing fresh air to a corridor.  There is a hot water coil in the ERV.  That's the only "conditioning" the air gets.

Looking at Nicks sketch in the Energy Recovery Wheel on VAV System - zonal exhaust thread it appears that eQuest cannot use exhaust air from one zone to an ERV that is attached to another zone.

Thanks for you input.

Best regards
for KEMA Inc

Paula Saaf P.E.
Engineer, Middletown

paula.saaf at dnvgl.com<mailto:paula.saaf at dnvgl.com>
Direct +1 860 3465001
dnvgl.com<http://dnvgl.com/>  |  LinkedIn<http://www.linkedin.com/company/dnvgl>

[DNV GL]<http://www.dnvgl.com/>
This message may contain confidential or private information. If you are not the addressee, please return the message to its sender and delete it from your files.  Please consider the environment before printing this email.


**************************************************************************************
This e-mail and any attachments thereto may contain confidential information and/or information protected by intellectual property rights for the exclusive attention of the intended addressees named above. If you have received this transmission in error, please immediately notify the sender by return e-mail and delete this message and its attachments. Unauthorized use, copying or further full or partial distribution of this e-mail or its contents is prohibited.
**************************************************************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20170328/e96ee2bb/attachment.htm>